RV slide-out and leveling repair, at your site.

What usually fails

Slide-outs and leveling systems live at the exact point where Florida weather meets moving parts — seals, motors, gears, and hydraulic lines that sit still for months and then get asked to perform on a deadline.

• Water past the seals — the big Florida one. Wiper and bulb seals shrink, tear, and mildew; rainy-season wind drives water past them; the floor edge below quietly rots. See our slide-out floor replacement page if the floor already feels soft.
• Schwintek sync problems — the room travels crooked, one side leading, until a motor faults or the room binds.
• Motor, gearbox, and rack wear — grinding, popping, or a room that moves in inches and stops.
• Hydraulic leaks — leveling jacks and hydraulic slides weeping fluid after long sits; a jack that drifts down overnight is telling you about its seals.
• Electrical faults — corroded connections (humidity), tired batteries sagging under motor load, and control boards that give up after a storm-season power event.
• Leveling out of level — jacks that won't extend or retract fully, auto-level that errors out, and Florida's sandy ground letting a pad sink until the rig isn't level anymore.

Symptoms worth calling about

• Slide stuck in, stuck out, or moving crooked
• Room moves a few inches and stops, or needs a second person pushing
• Water on the floor after rain, or a musty smell that lives in one slide room
• Floor that feels soft or spongy at the slide edges
• Jacks that won't retract, drift, or leave the rig visibly unlevel
• Clicking, grinding, or a motor that hums and gives up

What a mobile tech can and can't do on site

On site: motor and controller diagnosis and replacement, Schwintek re-sync and column work, seal replacement, hydraulic line and jack-seal work, battery and connection service, manual-override help when you're stuck mid-travel, and floor assessment. Most slide and leveling work is genuinely mobile-friendly — the rig doesn't have to move for the room to get fixed.

Honest limits: a bent slide frame, rot that has climbed the walls, or a room that must come completely out of the coach is shop-level work. A tech assessing yours should say so from the inspection, not after the teardown.

Have this ready when you reach out

• Which slide (or slides) and what it does — nothing, crooked, partway, noise
• Slide type if you know it (Schwintek rails on the room sides, through-frame, hydraulic)
• Any leak or soft-floor signs, and how long they've been there
• Whether the rig can stay where it is, or you have a move date
• RV year/make/model and where it's parked — and whether the slide can be fully extended there

Other services

Get a mobile tech to look at it

Tell us what's happening and where the RV is parked, and we'll match you with one local mobile technician for your area — not a shared list of companies.

Educational note: any cost ranges mentioned on this site are typical, general information only. Your technician confirms the service-call fee and an exact quote directly with you before work begins.